Kingston 8GB HyperX Fury DDR4 3600 Mhz Desktop Memory Single Stick/16, Black

SPECIFICATIONS
HX436C17FB3/8
8GB 1G x 64-Bit
DDR4-3600 CL17 288-Pin DIMM
Continued >>
kingston.com/hyperx
FEATURES
HyperX HX436C17FB3/8 is a 1G x 64-bit (8GB) DDR4-3600 CL17
SDRAM (Synchronous DRAM) 1Rx8, memory module, based on
eight 1G x 8-bit FBGA components per module. Each module kit
supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each
module has been tested to run at DDR4-3600 at a low latency timing
of 17-21-21 at 1.35V. The SPDs are programmed to JEDEC
standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each
288-pin DIMM uses gold contact fingers. The JEDEC standard
electrical and mechanical specifications are as follows:
CL(IDD)
Row Cycle Time (tRCmin)
Refresh to Active/Refresh
Command Time (tRFCmin)
Row Active Time (tRASmin)
UL Rating
Operating Temperature
Storage Temperature
17 cycles
45.75ns(min.)
350ns(min.)
32ns(min.)
94 V – 0
0o
C to +85o
C
-55o
C to +100o C

FACTORY TIMING PARAMETERS
• Default (JEDEC): DDR4-2400 CL17-17-17 @1.2V
• XMP Profile #1: DDR4-3600 CL17-21-21 @1.35V
• XMP Profile #2: DDR4-3000 CL15-17-17 @1.35V
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.3425” (34.1mm), w/heatsink